Internal Calibration/Adjustment; No Function When You Press J; Calibration And Adjustment; External Calibration/Adjustment; Default Weight External Calibration/Adjustment; Weight Can Be Selected Under Menu Item - Sartorius Signum 1 Operating Instruction

44
Operation
Preparation
§ Switch on the scale: Press e
§ While all segments are lit, press the ) key
§ Select the Setup menu: Press k repeatedly until
§ Open the Setup menu: Press the ) key
$ Select weighing platform 1, "
$ Select interface 1, "
COM1 " or interface 2, "
Press the k key
Select weighing platform 2, "
Setup
1
wp-1
1.9.
1.10.
1.11.
1.12.
1.13.
1.15.
1.16.
1.17.
1.18.
§ Save settings and exit operating menu:
( key (repeatedly)
1) = Setting cannot be changed on verified models
2) = Factory setting on verified models
* Factory setting
Setup is displayed
": Press the ) key, or
WP1
COM2 " (depending n the interface used):
": Press the ) key
WP

Calibration and Adjustment

1.9.1* Ext. calibration/adjustment; default weight
1.9.3 Ext. calibration/adjustment; weight can be
selected under menu item 1.18.1
1.9.4 Internal calibration/adjustment (models with
built-in motorized calibration weight only)
1.9.8 Set preload
1.9.9 Clear preload
1.9.10 No function when you press
Calibration/Adjustment Sequence
1.10.1 Calibration with automatic adjustment
1.10.2* Calibration with adjustment triggered manually
Zero-setting Range
1.11.1 1 percent/max. cap.
1.11.2* 2 percent/max.cap.
Initial Zero-setting Range
1.12.1* Factory setting (depends on model)
1.12.2 2 percent/max. cap.
1.12.3 5 percent/max.cap. (setting depends on model)
Tare/zero at Power On
1.13.1* On
1.13.2 Off, load previous tare value
1.13.3 Only zero at power on
Calibration Prompt
1.15.1* Off
1.15.2 Calibration prompt (W) flashes on the display
External Calibration
1.16.1* Accessible
2)
1.16.2 Blocked
Calibration weight unit
1.17.1 Grams
1.17.2* Kilograms
1)
1.17.4 Pounds
Enter Calibration Weight
1.18.1 External user-defined weight
(enter value; e.g.: 10,000 g)
J
1)