Sartorius Signum 1 Operating Instruction page 47

Example
Determining sample weights while monitoring the minimum sample quantity (in this example, SQmin = 100 g)
Settings (changes in the factory settings required for this example):
Setup: SQmin: Display
Step
1 Switch on the scale and configure
settings as indicated above
2 Place the container for the
sample on the scale and tare
3 Measure the weight of a sample
(in this example:
minimum sample quantity not reached)
4 Print weight
5 Measure the weight of another sample
(in this example:
minimum sample quantity exceeded)
6 Print weight
7 Show value of minimum sample
quantity for 4 seconds
8 Weigh other samples as desired
Key (or action)
e
)
Place sample on scale
p
Place sample on scale
p
k
Display/printout
N + 90.0 !
|
N + 110.0 g
|
|
|
47