Sartorius Signum 1 Operating Instruction page 32

Configuration
Setup
3
uniCom1
Printer
Analog
Memory
Comspec
1) When setting 8.14.1 is active, analog data output only works for XBPI weighing instruments
2)
not with setting 8.14.1
* Factory setting
32
YDP01IS
*
line
label
lab ff
YDP02
5.1. through 5.4.
Numeric menu as for COM1
YDP20
5.1. through 5.4.
Numeric menu as for COM1
YDP02IS
line *
label
Uni-pri
5.1. through 5.6.
Numeric menu as for COM1
YDP04IS *
line *
label
lab ff
yam01is
8.12.
8.12.1*
8.12.2
8.13.
8.13.1*
8.13.2
8.14.
8.14.1* 1)
8.14.2
8.15.
2)
8.15.1
8.15.2
yam01is
Printer configuration
YDP01IS
Strip printer
Label printer
Label printer with manual feed
YDP02 Variants
YDP20-0CE
YDP02IS
Strip printer
Label printer
Universal interface
YDP04IS
Strip printer
Label printer
Label printer with manual feed
YAM01IS as electronic memory for print data
Analog data output port for PLC operation
Analog output: value
Net value
Gross value
Analog output: error indicator
High level (20 mA)
Low level (0/4 mA). When menu is open or during calibration:
0/4 mA on this interface.
Analog output: mode
Zero to maximum capacity
Minimum/maximum values
Analog output: min./max.
Min. (0/4 mA) input in kg
Max. (20 mA) input in kg
Verifiable data memory
YAM01IS external data memory
Optional:
Reference weigher connection (Option A15)
OFF
A/D configuration (see operating instructions supplied
with Option A15 for details)