Gmp-Compliant Printouts - Sartorius Signum 1 Operating Instruction

GMP-compliant Printout
(optional in Signum 1)
When the corresponding menu item is
active, the printout is bracketed by a GMP
header and a GMP footer (GMP: "Good
Manufacturing Practice").
The GMP header precedes the first
measured result. The GMP footer is printed
after the last result in a series of measure-
ments ("ISO/GMP/GLP: For several applica-
tion results," menu item 7.11.3). To end a
series of measured results, press and hold
the p key (> 2 seconds). In this case, the
A symbol is displayed after the GMP head-
er is printed and remains in the display
until the GMP footer is printed.
If you toggle to a different platform
(Signum 2 and 3 only) while a GMP print-
out of several measured results is being
generated (menu item 7.11.3), the GMP
footer for the platform used up to that
point is generated when you press n.
The GMP header for the other platform is
included on the next printout generated.
A GMP-compliant printout is generated
automatically at the conclusion of
calibration/adjustment, linearization, and
when you set or clear a preload.
90
Three examples of GMP headers and one
example of a footer are shown in the
following. On Signum 1 models, the "date
and time" line is not included.
Weighing platform WP1:
--------------------
14.01.2007 09:43
Typ SIWR
Ser.no. 12345678
Vers. 1.1007.12.1
BVers. 01-25-01
--------------------
--------------------
14.01.2007 09:45
Typ SIWR
Ser.no. 12345678
Vers. 1.1007.12.1
BVers. 01-25-01
Typ IS12000S
Ser.no 12345678
--------------------
--------------------
14.01.2007 09:45
Typ SIWR
Ser.no. 12345678
Vers. 1.1007.12.1
BVers. 01-25-01
Typ SBI
--------------------
--------------------
14.01.2007 09:45
Name:
--------------------
1) Not applicable for Signum 1 display and control units
2)
Signum 2 and 3 only
Dotted line
1)
Date and time
Signum model
Signum serial no.
Software release for application
Software release for basic version
Dotted line
Weighing platform WP2 (XBPI protocol):
Dotted line
Date and time 1)
Signum model
Signum serial no.
Software release for application
Software release for basic version
Weighing platform model
Weighing platform serial no.
Dotted line
Weighing platform WP2 (SBI protocol):
Dotted line
1)
Date and time
Signum model
Signum serial no.
Software release for application
Software release for basic version
(Weighing platform model)
Dotted line
GMP footer:
Dotted line
1)
Date and time
Field for operator signature
Blank line
Dotted line
2)
2)