Polycom RMX 2000 Hardware Manual page 25
Polycom computer hardware user manual
Hide thumbs
Also See for RMX 2000:
- Getting started manual (133 pages) ,
- Migration manual (12 pages) ,
- Installation & configuration manual (9 pages)
Table of Contents
Advertisement
5
Carefully slide the MPM Module out through the front panel.
6
On the card to be installed, move the ejector levers to their fully open
position.
7
Slide in the replacement MPM Module.
8
Push the MPM Module firmly into the Backplane, making sure it is
properly seated in its slot.
9
Ensure that the metal ejector levers are fully retracted into their
housings.
10 Tighten the captive screws on the front panel of the RMX that secure
the MPM Module.
1
Polycom RMX 2000 Hardware Guide
1-19
Advertisement
Table of Contents
Need help?
Do you have a question about the RMX 2000 and is the answer not in the manual?
Questions and answers