Configuring Ospf Dr Election - HP MSR Series Configuration Manual

10.3.1.0/24
10.4.1.0/24
10.5.1.0/24
10.1.1.0/24
Total Nets: 5
Intra Area: 2
4. Configure a static route and configure OSPF to redistribute the static route on Router C:
[RouterC] ip route-static 3.1.2.1 24 10.4.1.2
[RouterC] ospf
[RouterC-ospf-1] import-route static
[RouterC-ospf-1] quit
# Display routing information on Router D.
<RouterD> display ospf routing
Routing for Network
Destination
10.2.1.0/24
10.3.1.0/24
10.4.1.0/24
10.5.1.0/24
10.1.1.0/24
Routing for ASEs
Destination
3.1.2.0/24
Total Nets: 6
Intra Area: 2
The output shows an external route imported from the NSSA area on Router D.

Configuring OSPF DR election

Network requirements
• Enable OSPF on Routers A, B, C, and D on the same network.
Configure Router A as the DR and configure Router C as the BDR.
•
7
3
17
5
Inter Area: 3
OSPF Process 1 with Router ID 10.5.1.1
Routing Tables
Cost
22
10
25
10
12
Cost
1
Inter Area: 3
Inter 10.2.1.1
Stub 10.4.1.1
Inter 10.2.1.1
Inter 10.2.1.1
ASE: 0 NSSA: 0
Type NextHop
Inter 10.3.1.1
Transit 10.3.1.2
Inter 10.3.1.1
Stub 10.5.1.1
Inter 10.3.1.1
Type Tag
Type2 1
ASE: 1 NSSA: 0
96
10.2.1.1
10.4.1.1
10.2.1.1
10.2.1.1
AdvRouter
10.3.1.1
10.3.1.1
10.3.1.1
10.5.1.1
10.3.1.1
NextHop AdvRouter
10.3.1.1 10.2.1.1
0.0.0.1
0.0.0.1
0.0.0.1
0.0.0.1
Area
0.0.0.2
0.0.0.2
0.0.0.2
0.0.0.2
0.0.0.2