HP MSR Series Configuration Manual page 142

Interface bandwidth
≤ 2500 Mbps
> 2500 Mbps
4. If none of the above costs is used, a default cost of 10 applies.
Configuring an IS-IS cost for an interface
Step
1. Enter system view.
2. Enter IS-IS view.
3. Specify an IS-IS cost style.
4. Return to system view.
5. Enter interface view.
6. Specify a cost for the
interface.
Configuring a global IS-IS cost
Step
1. Enter system view.
2. Enter IS-IS view.
3. Specify an IS-IS
cost style.
4. Specify a global
IS-IS cost.
Enabling automatic IS-IS cost calculation
Step
1. Enter system view.
2. Enter IS-IS view.
3. Specify an IS-IS cost style.
4. Enable automatic IS-IS cost
calculation.
5. Configure a bandwidth
reference value for
automatic IS-IS cost
calculation.
Interface cost
20
10
Command
system-view
isis [ process-id ] [ vpn-instance
vpn-instance-name ]
cost-style { narrow | wide | wide-compatible
| { compatible | narrow-compatible }
[ relax-spf-limit ] }
quit
interface interface-type interface-number
isis [ ipv6-unicast ] cost value [ level-1 |
level-2 ]
Command
system-view
isis [ process-id ] [ vpn-instance vpn-instance-name ]
cost-style { narrow | wide | wide-compatible |
{ compatible | narrow-compatible }
[ relax-spf-limit ] }
circuit-cost value [ level-1 | level-2 ]
Command
system-view
isis [ process-id ] [ vpn-instance
vpn-instance-name ]
cost-style { wide | wide-compatible }
auto-cost enable
bandwidth-reference value
130
Remarks
N/A
N/A
Optional.
The default is narrow.
N/A
N/A
Optional.
No cost is specified for the
interface by default.
Remarks
N/A
N/A
Optional.
narrow by default.
No global cost is specified
by default.
Remarks
N/A
N/A
narrow by default.
Disabled by default.
Optional.
100 Mbps by default.