HP MSR Series Configuration Manual page 57

Protocol: RIP
Preference: 100
IpPrecedence:
NextHop: 192.168.1.2
BkNextHop: 0.0.0.0
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
BKTunnel ID: 0x0
State: Active Adv
Tag: 0
Destination: 100.1.1.0/24
Protocol: RIP
Preference: 100
IpPrecedence:
NextHop: 192.168.2.2
BkNextHop: 0.0.0.0
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
BKTunnel ID: 0x0
State: Inactive Adv
Tag: 0
# Enable RIP event debugging on Router A.
<RouterA> debugging rip 1 event
<RouterA> terminal debugging
# When the link over Ethernet 1/1 fails, Router A quickly detects the link state change.
%Jan 19 10:41:51:203 2008 RouterA BFD/4/LOG:Sess[192.168.1.1/192.168.1.2,
Eth1/1,Ctrl], Sta: UP->DOWN, Diag: 1
*Jan 19 10:33:12:813 2008 RouterA RM/6/RMDEBUG: RIP-BFD: Message Type Disable, Connect
Type Direct-connect, Pkt Type Echo, Src IP Address 192.168.1.1, Src IFIndex4, Nbr IP
Address 192.168.1.2.
# Display the BFD information of Router A.
<RouterA> display bfd session
The output shows that Router A has deleted the BFD session to Router C and displays no output.
# Display the RIP routes of RIP process 1 on Router A.
<RouterA> display rip 1 route
Route Flags: R - RIP, T - TRIP
P - Permanent, A - Aging, S - Suppressed, G - Garbage-collect
----------------------------------------------------------------------------
The output shows that the RIP route learned from Router C no longer exists.
# Display the RIP route destined for 100.1.1.0/24 on Router A.
<RouterA> display ip routing-table 100.1.1.0 24 verbose
Routing Table : Public
Summary Count : 1
Destination: 100.1.1.0/24
Protocol: RIP
Preference: 100
Process ID: 1
Cost: 1
QosLcId:
Interface: Ethernet1/1
BkInterface:
Neighbor : 192.168.1.2
Label: NULL
BKLabel: NULL
Age: 00h00m47s
Process ID: 2
Cost: 2
QosLcId:
Interface: Ethernet1/2
BkInterface:
Neighbor : 192.168.2.2
Label: NULL
BKLabel: NULL
Age: 00h12m50s
Process ID: 2
Cost: 2
45