Binding an IS-IS process with MIBs
This task allows you to bind MIB with an IS-IS process to send and collect information. For more
information about MIB, see Network Management and Monitoring Configuration Guide.
To bind an IS-IS process with MIBs:
Step
1.
Enter system view.
2.
Enter IS-IS view.
3.
Bind the IS-IS process with
MIBs.
Configuring BFD for IS-IS
To enable BFD on an IS-IS interface:
Step
1.
Enter system view.
2.
Enter interface view.
3.
Enable IS-IS on the interface.
4.
Enable BFD on the IS-IS
interface.
Displaying and maintaining IS-IS
Task
Display brief IS-IS configuration
information.
Display the status of IS-IS debug
switches.
Display the IS-IS GR state.
Display information about IS-IS
enabled interfaces.
Command
system-view
isis [ process-id ] [ vpn-instance
vpn-instance-name ]
isis mib-binding process-id
Command
system-view
interface interface-type interface-number
isis enable [ process-id ]
isis bfd enable
Command
display isis brief [ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
display isis debug-switches { process-id |
vpn-instance vpn-instance-name } [ | { begin |
exclude | include } regular-expression ]
display isis graceful-restart status [ level-1 |
level-2 ] [ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
display isis interface [ statistics | [ interface-type
interface-number ] [ verbose ] ] [ process-id |
vpn-instance vpn-instance-name ] [ | { begin |
exclude | include } regular-expression ]
145
Remarks
N/A
N/A
By default, MIBs are bound with
IS-IS process 1.
Remarks
N/A
N/A
Disabled by default.
Not enabled by default.
Remarks
Available in any
view.
Available in any
view.
Available in any
view.
Available in any
view.