Configuring Ospfv3 Route Redistribution - HP MSR Series Configuration Manual

Layer 3 - ip routing
Hide thumbs Also See for MSR Series:
Table of Contents

Advertisement

# Display neighbor information on Router A. DR priorities have been updated, but the DR and BDR
are not changed.
[RouterA] display ospfv3 peer
----------------------------------------------------------------------
Neighbor ID
2.2.2.2
3.3.3.3
4.4.4.4
# Display neighbor information on Router D. Router D is still the DR.
[RouterD] display ospfv3 peer
----------------------------------------------------------------------
Neighbor ID
1.1.1.1
2.2.2.2
3.3.3.3
4.
Restart DR and BDR election:
# Use the shutdown and undo shutdown commands on interfaces to restart DR and BDR election.
(Details not shown.)
# Display neighbor information on Router A. Router C becomes the BDR.
[RouterA] display ospfv3 peer
----------------------------------------------------------------------
Neighbor ID
2.2.2.2
3.3.3.3
4.4.4.4
# Display neighbor information on Router D. Router A becomes the DR.
[RouterD] display ospfv3 peer
----------------------------------------------------------------------
Neighbor ID
1.1.1.1
2.2.2.2
3.3.3.3

Configuring OSPFv3 route redistribution

Network requirements
In
Figure
OSPFv3 process 1 and OSPFv3 process 2 are enabled on Router B. Router B communicates with
Router A and Router C through OSPFv3 process 1 and OSPFv3 process 2, respectively.
Configure OSPFv3 process 2 to redistribute direct routes and the routes from OSPFv3 process 1 on
Router B, and set the default metric for redistributed routes to 3. Router C can then learn the routes
destined for 1::0/64 and 2::0/64, and Router A cannot learn the routes destined for 3::0/64 or
4::0/64.
OSPFv3 Area ID 0.0.0.0 (Process 1)
Pri
State
0
2-Way/DROther
2
Full/Backup
1
Full/DR
OSPFv3 Area ID 0.0.0.0 (Process 1)
Pri
State
100
Full/DROther
0
Full/DROther
2
Full/Backup
OSPFv3 Area ID 0.0.0.0 (Process 1)
Pri
State
0
Full/DROther
2
Full/Backup
1
Full/DROther
OSPFv3 Area ID 0.0.0.0 (Process 1)
Pri
State
100
Full/DR
0
2-Way/DROther
2
Full/Backup
89, Router A, Router B, and Router C are in Area 2.
Dead Time
Interface
00:00:38
Eth1/1
00:00:32
Eth1/1
00:00:36
Eth1/1
Dead Time
Interface
00:00:33
Eth1/1
00:00:36
Eth1/1
00:00:40
Eth1/1
Dead Time
Interface
00:00:31
Eth1/1
00:00:39
Eth1/1
00:00:37
Eth1/1
Dead Time
Interface
00:00:34
Eth1/1
00:00:34
Eth1/1
00:00:32
Eth1/1
315
Instance ID
0
0
0
Instance ID
0
0
0
Instance ID
0
0
0
Instance ID
0
0
0

Advertisement

Table of Contents
loading

Table of Contents