HP MSR Series Configuration Manual page 387
Layer 3 - ip routing
Hide thumbs
Also See for MSR Series:
- Configuration manual (889 pages) ,
- Command reference manual (684 pages) ,
- Wan access configuration manual (293 pages)
Table of Contents
Advertisement
[RouterA] ipv6
[RouterA] bgp 65008
[RouterA-bgp] router-id 1.1.1.1
[RouterA-bgp] ipv6-family
[RouterA-bgp-af-ipv6] group ibgp internal
[RouterA-bgp-af-ipv6] peer 1::2 group ibgp
[RouterA-bgp-af-ipv6] quit
[RouterA-bgp] quit
# Configure Router B.
<RouterB> system-view
[RouterB] ipv6
[RouterB] bgp 65008
[RouterB-bgp] router-id 2.2.2.2
[RouterB-bgp] ipv6-family
[RouterB-bgp-af-ipv6] group ibgp internal
[RouterB-bgp-af-ipv6] peer 1::1 group ibgp
[RouterB-bgp-af-ipv6] quit
[RouterB-bgp] quit
3.
Configure the EBGP connection:
# Configure Router C.
<RouterC> system-view
[RouterC] ipv6
[RouterC] bgp 65009
[RouterC-bgp] router-id 3.3.3.3
[RouterC-bgp] ipv6-family
[RouterC-bgp-af-ipv6] group ebgp external
[RouterC-bgp-af-ipv6] peer 3::1 as-number 65008
[RouterC-bgp-af-ipv6] peer 3::1 group ebgp
[RouterC-bgp-af-ipv6] quit
[RouterC-bgp] quit
# Configure Router B.
[RouterB-bgp] ipv6-family
[RouterB-bgp-af-ipv6] group ebgp external
[RouterB-bgp-af-ipv6] peer 3::2 as-number 65009
[RouterB-bgp-af-ipv6] peer 3::2 group ebgp
[RouterB-bgp-af-ipv6] quit
[RouterB-bgp] quit
4.
Configure IPsec policies:
# On Router A, create an IPsec proposal named tran1, and set the encapsulation mode to
transport mode, the security protocol to ESP, the encryption algorithm to DES, and authentication
algorithm to SHA1. Create an IPsec policy named policy001, specify the manual mode for it,
reference IPsec proposal tran1, set the SPIs of the inbound and outbound SAs to 12345, and the
keys for the inbound and outbound SAs using ESP to abcdefg.
[RouterA] ipsec proposal tran1
[RouterA-ipsec-proposal-tran1] encapsulation-mode transport
[RouterA-ipsec-proposal-tran1] transform esp
[RouterA-ipsec-proposal-tran1] esp encryption-algorithm des
375
Advertisement
Table of Contents
Troubleshooting
