10. Slide the access panel back about 1.5 cm (0.5 in).
11. Lift and remove the access panel.
Install the chassis access panel
Procedure
1. Install the chassis access panel.
a. Place the access panel and align the pin on the chassis, and slide it towards the front of the server.
b. Lock the access panel latch using the T-15 Torx screwdriver.
2. Install the chassis into the rack.
3. Install all nodes, drives and power supplies.
4. If removed, install the security bezel.
5. If removed, install the RCM module.
6. Connect all peripheral cables to the nodes and chassis.
7. Power up the nodes.
46
Install the chassis access panel