HP APOLLO 2000 User Manual page 143

13. Connect the Accelerator 1 power cable to Accelerator 1.
For more information, see "Accelerator cabling."
NOTE:
If installing a single NVIDIA Tesla K80, M60, or M40 GPU, skip to step 18.
NOTE:
Single NVIDIA Tesla K40 GPUs are not supported in a three-slot riser cage assembly.
14. Remove the existing front and rear support brackets from Accelerator 2.
15. Install the rear and front support brackets onto Accelerator 2.
a. Secure the rear support bracket for Accelerator 2 with three T-10 screws.
b. Secure the front support bracket for Accelerator 2 with two M2.5 screws.
16. Install Accelerator 2 into slot 4.
Hardware options installation 143