Installing Nvidia Tesla K80, K40, M60, And M40 Gpus In A Three-Slot Riser Cage Assembly - HP APOLLO 2000 User Manual

19. Connect the power cable to the bayonet board.
For more information, see "Accelerator cabling."
20. Install the three-slot riser cage assembly.
21. Install the node into the chassis.
22. Connect all peripheral cables to the node.
23. Power up the node.
Installing NVIDIA Tesla K80, K40, M60, and M40 GPUs in a three-slot riser cage
assembly
About this task
For more information about product features, specifications, options, configurations, and compatibility, see the
product QuickSpecs on the Hewlett Packard Enterprise website.
To install the component:
Procedure
1. Power down the node.
2. Disconnect all peripheral cables from the node.
3. Remove the node from the chassis.
4. Place the node on a flat, level surface.
5. Remove the three-slot riser cage assembly.
6. Remove the riser cage bracket.
140

Installing NVIDIA Tesla K80, K40, M60, and M40 GPUs in a three-slot riser cage assembly