Installing Nvidia Grid K2 Raf Gpus In A Three-Slot Riser Cage Assembly - HP APOLLO 2000 User Manual

IMPORTANT:
If installing an Intel Xeon Phi Coprocessor 5110P, connect the power cable to the 2x4 connector
only. Do not connect the power cable to the 2x3 connector.
11. Connect the power cable to the accelerator.
For more information, see "Accelerator cabling."
12. Install the FlexibleLOM 2U node riser cage assembly.
13. Connect the power cable to the bayonet board.
14. Install the node into the chassis.
15. Connect all peripheral cables to the node.
16. Power up the node.

Installing NVIDIA GRID K2 RAF GPUs in a three-slot riser cage assembly

About this task
For more information about product features, specifications, options, configurations, and compatibility, see the
product QuickSpecs on the Hewlett Packard Enterprise website.
To install the component:
Procedure
1. Power down the node.
2. Disconnect all peripheral cables from the node.
3. Remove the node from the chassis.
4. Place the node on a flat, level surface.
5. Remove the three-slot riser cage assembly.
6. Remove the riser cage bracket.
124 Installing NVIDIA GRID K2 RAF GPUs in a three-slot riser cage assembly