Power Supply Specifications; Hot-Plug Power Supply Calculations; Thermal Limitations - HP APOLLO 2000 User Manual

Specifications
Weight (maximum)
Weight (minimum)

Power supply specifications

CAUTION:
Do not mix power supplies with different efficiency and wattage in the chassis. Install only one type of
power supply. Verify that all power supplies have the same part number and label color. The system
becomes unstable and may shut down when it detects mismatched power supplies.
Depending on installed options, the system is configured with one of the following power supplies:
• HPE 800W Flex Slot Titanium Hot Plug Power Supply Kit – 96% efficiency
• HPE 800W Flex Slot Platinum Hot Plug Power Supply Kit – 94% efficiency
• HPE 800W Flex Slot Universal Hot Plug Power Supply Kit – 94% efficiency
• HPE 800W Flex Slot -48VDC Hot Plug Power Supply Kit – 94% efficiency
• HPE 1400W Flex Slot Platinum Plus Hot Plug Power Supply Kit – 94% efficiency
For more information about the power supply features, specifications, and compatibility, see the Hewlett
Packard Enterprise website .

Hot-plug power supply calculations

For hot-plug power supply specifications and calculators to determine electrical and heat loading for the
server, see the Hewlett Packard Enterprise Power Advisor website.

Thermal limitations

To ensure continued safe and reliable equipment operation, install or position the rack in a well-ventilated,
climate-controlled environment.
The operating temperature inside the rack is always higher than the room temperature and is dependent on
the configuration of equipment in the rack. Check the TMRA for each piece of equipment before installation.
CAUTION:
To reduce the risk of damage to the equipment when installing third-party options:
• Do not permit optional equipment to impede airflow around the chassis or to increase the internal
rack temperature beyond the maximum allowable limits.
• Do not exceed the manufacturer's TMRA.
List of options with thermal limitations
Processors
Description
® ®
Intel Xeon Processor E5-2643 v4
® ®
Intel Xeon Processor E5-1680 v3
1
®
If the Intel Xeon
or GPU accelerator is installed in slot 2 of the FlexibleLOM 2U node riser cage assembly (PN 798184-B21),
note the maximum inlet ambient temperature for the option installed in slot 2.
1
1
®
Processor E5-2643 v4 is installed in a 2U node, and a PCIe NIC card, storage controller,
Value
6.47 kg (14.27lb)
4.73 kg (10.43 lb)
Maximum inlet ambient temperature
30°C (86°F)
23°C (73.4°F)
Power supply specifications 195