Remove The Rear I/O Blank - HP APOLLO 2000 User Manual

9. Remove the chassis from the rack.
For more information, see the documentation that ships with the rack mounting option.
10. Place the chassis on a flat surface.

Remove the rear I/O blank

Procedure
1. Power down the node .
2. Disconnect all peripheral cables from the node .
3. Remove the node from the chassis.
4. Place the node on a flat, level surface.
5. Remove the rear I/O blanks:
• 1U left rear I/O blank
• 1U right rear I/O blank
48 Remove the rear I/O blank