HP APOLLO 2000 User Manual page 155

CAUTION:
Close and hold down the processor cover socket while closing the processor locking levers. The
levers should close without resistance. Forcing the levers closed can damage the processor and
socket, requiring system board replacement.
12. Press and hold the processor retaining bracket in place, and then close each processor locking lever.
Press only in the area indicated on the processor retaining bracket.
CAUTION:
Always use a new heatsink when replacing processors. Failure to use new components can cause
damage to the processor.
13. Remove the thermal interface protective cover from the heatsink.
CAUTION:
Heatsink retaining screws should be tightened or loosened in diagonally opposite pairs (in an "X"
pattern). Do not overtighten the screws as this can damage the board, connectors, or screws.
14. Install the heatsink:
Hardware options installation 155