Removing A Drive Blank; Installing A Hot-Plug Drive - HP APOLLO 2000 User Manual

Removing a drive blank

Procedure
1. If installed, remove the security bezel.
2. Remove the drive blank.

Installing a hot-plug drive

About this task
The chassis can support up to 12 drives in an LFF configuration and up to 24 drives in an SFF configuration.
WARNING:
To reduce the risk of injury from electric shock, do not install more than one drive carrier at a time.
CAUTION:
To prevent improper cooling and thermal damage, do not operate the chassis unless all bays are
populated with either a component or a blank.
Procedure
1. If installed, remove the security bezel.
2. Remove the drive blank.
3. Prepare the drive.
• SFF SmartDrive
• Low-profile LFF hot-plug drive
76 Removing a drive blank