HP APOLLO 2000 User Manual page 30

Online/Activity LED (green)
On, off, or flashing
On, off, or flashing
On
On
1 flash per second
1 flash per second
4 flashes per second
4 flashes per second
30 Component identification
Fault/UID LED (amber/blue)
Alternating amber and blue
Solid blue
Flashing amber
Off
Flashing amber
Off
Flashing amber
Off
Definition
One or more of the following
conditions exist:
• The drive has failed.
• A predictive failure alert has
been received for this drive.
• The drive has been selected by
a management application.
One or both of the following
conditions exist:
• The drive is operating normally.
• The drive has been selected by
a management application.
A predictive failure alert has been
received for this drive. Replace the
drive as soon as possible.
The drive is online but is not
currently active.
Do not remove the drive.
Removing the drive might
terminate the current operation
and cause data loss.
The drive is part of an array that is
undergoing capacity expansion or
stripe migration, but a predictive
failure alert has been received for
this drive. To minimize the risk of
data loss, do not remove the drive
until the expansion or migration is
complete.
Do not remove the drive.
Removing the drive might
terminate the current operation
and cause data loss.
The drive is rebuilding, erasing, or
is part of an array that is
undergoing capacity expansion or
stripe migration.
The drive is active but a predictive
failure alert has been received for
this drive. Replace the drive as
soon as possible.
The drive is active and is operating
normally.
Table Continued