Slide the access panel back about 1.5 cm (0.5 in).
b.
Lift and remove the access panel.
c.
Turn the access panel over to locate the access panel label. This label provides information on installing
various options, flexible memory configurations, and LED status indicators.
Install the access panel
WARNING:
components to cool before touching them.
CAUTION:
beginning any installation procedure. Improper grounding can cause ESD.
CAUTION:
chassis in this manner results in improper airflow and improper cooling that can lead to thermal
damage.
To install the component:
Place the access panel on top of the server.
1.
Be sure all notches are in alignment.
To reduce the risk of personal injury from hot surfaces, allow the internal system
To prevent damage to electrical components, properly ground the server before
Do not operate the chassis with the access panel open or removed. Operating the
Operations 12