Remove the access panel
To remove the component:
Power down the node (on page 21).
1.
Remove the node
2.
Press the access panel release button.
3.
Slide the access panel towards the rear of the node, and then lift to remove the panel.
4.
Install the access panel
Place the access panel on top of the node.
1.
Slide the access panel forward until it clicks into place.
2.
Safety considerations
Before performing service procedures, review all the safety information.
Preventing electrostatic discharge
To prevent damaging the system, be aware of the precautions you need to follow when setting up the system
or handling parts. A discharge of static electricity from a finger or other conductor may damage system
boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the device.
To prevent electrostatic damage:
•
Avoid hand contact by transporting and storing products in static-safe containers.
•
Keep electrostatic-sensitive parts in their containers until they arrive at static-free workstations.
•
Place parts on a grounded surface before removing them from their containers.
•
Avoid touching pins, leads, or circuitry.
("Remove a node from the
chassis" on page 22).
Removal and replacement procedures 23