Commissioning A New Machine - Hakki Pilke OH 27 Instructions For Assembly, Operation And Maintenance

After unpacking the machine, dispose of the packaging material in an
environmentally friendly way.
Install the loose parts supplied with the machine:
1. Place the cross-cut cradle extension into the square pipe in the cradle frame.
4. Install the adjustment lever of the splitting blade
onto the joint pin on the machine frame. Add the
washer and lock the parts in place with a split
cotter.
Hakki Pilke 27

Commissioning a New Machine

2. Adjust the extension to
the desired length and lock
it in place with a locking
nut.
3. Adjust the
extreme position of
the cradle (towards
the user) with the
two nuts in the
lower part of the
cradle. There
should be approx.
3 mm between the
cradle cover and
the rocking cover.
8 (39)
Original
Rocking cover
Cradle
cover
Version 5-2014