Start And Stop Buttons - Hakki Pilke OH 27 Instructions For Assembly, Operation And Maintenance

The start box is on the left hand side of the cutting blade.
The machine start button is the green button on the box.
The red button on the box is the stop button.
A tractor-driven machine cannot be halted from the red stop button of an
electrically driven machine!!!
Make sure that the motor starts running in the correct direction when you start
it.
The direction of rotation is correct if the teeth of the cutting blade run downwards
seen from the front of the machine. The direction is incorrect if the teeth run
upwards, and in this case the machine must be stopped immediately. Only
persons authorised to do so may change the rotation direction.
An electrically driven machine must always be stopped for transportation.
In order to prevent children and other outsiders from starting the machine, the
electrical cable must always be disconnected during breaks or at the end of firewood
processing.
Hakki Pilke 27
15 (39)
Angular gear shaft for
articulated shaft
.
Position of the cover when powered
by a tractor

Start and Stop Buttons

Original Version 5-2014