Table of Contents
Advertisement
Protect yourself when handling lubricants to prevent them from causing problems to
your skin.
When handling lubricants, make sure they do not end up in the
environment.
Apply grease on the points marked with this yellow symbol.
Hydraulic oil tank: capacity 40 l.
Angular Gear
The correct oil level:
In the horizontal position, oil
flows out through the filling hole.
Hakki Pilke 27
32 (39)
Machine Lubrication
Hydraulic Oil
Change the hydraulic oil and filter at intervals of
approx. 500 operating hours or every other year.
The filling hole for hydraulic oil: there is a
dipstick in the cap, with a mark indicating the
correct oil level.
Hydraulic oil: normal hydraulic oil
Hydraulic filter: cartridge type CR 50.
Splitting Mechanism
Splitting control lever
The splitting mechanism is located in
front of the cross-cut cradle.
The mechanism can be adjusted by
removing the cover and its locking bolts.
Original
E.g. Neste 32.
Change the oil of angular
gear
approx. 1,000 operating
hours.
at
intervals
of
Version 5-2014
Hide quick links:
Advertisement
Table of Contents
