Processing The Firewood - Hakki Pilke OH 27 Instructions For Assembly, Operation And Maintenance

You can start processing firewood as soon as you have familiarised yourself with all
safety precautions given above for the safe operation of the machine. Remember that
a test run must always be carried out before starting actual operation.
1. Adjust the revolutions of the tractor's power take-off to 410 rpm.
2. Place the wood measuring device rod in the desired position (see page 16).
3. Place the splitting blade in the desired vertical position (see page 15).
7. Calmly push the cradle forward and keep pushing it until it reaches its extreme
position. The cut wood remains in the trough formed by the cradle and the machine
frame.
Hakki Pilke 27
21 (39)

Processing the Firewood

4. Pull the splitting cradle to
its rear position. Note!
Always do this when
transferring wood for
cutting.
5. Lift the wood into the
cross-cut cradle. Observe
the proper lifting position
and mind your back (see
page 20)!
6. Transfer the wood against
the length limiter.
8. Calmly pull back the
cross-cut cradle.
9. The cut wood drops
down into the splitting
chute and hits the
automatic splitting release
lever, which triggers the
hydraulic splitting
movement.
Original Version 5-2014