The length of the wood being split can be adjusted progressively from approx. 20 cm
to 55 cm using a mechanical wood measuring device attached to the splitting chute
cover (see the following figure). The location of the measuring device rod determines
the length of the wood being split. It is adjusted as follows:
1. Loosen the adjuster clamping
screw.
2. Move the measuring device rod to
the desired position and tighten
the clamping screw.
The lower part of the machine has an emergency stop pedal at the operator's position.
If a dangerous situation occurs during machine operation, push the pedal down as
shown in the following figure.
Hakki Pilke 27
18 (39)
Wood Length Adjustment
Emergency Stop
Original
Version 5-2014