Permissible Motors - Siemens SINAMICS G12 Hardware Installation Manual

Introduction

3.1 Permissible motors

3.1 Permissible motors
Note
Motors for inverter operation
Only use motors that are suitable for operation with inverters with a DC link.
Motors for 200 V Power Modules
For the 200 V Power Modules, induction motors are permissible in the range from 25% ... 150%
of the inverter power without any restrictions.
Motors for 400 V Power Modules
For the 400 V Power Modules, induction motors are permissible in the range from
25 % ... 150 % of the inverter power without any restrictions.
Motors for 690 V Power Modules
For the 690 V Power Modules, induction motors are permissible in the range from 50
% ... 150 % of the inverter power without any restrictions.
22
Hardware Installation Manual, 08/2017, A5E33294624B AG
Power Module PM240-2