Dimension Drawings And Drilling Dimensions For Pt Power Modules - Siemens SINAMICS G12 Hardware Installation Manual

4.4.3

Dimension drawings and drilling dimensions for PT Power Modules

Use the optional mounting frame to mount a Power Module in push-through technology in a
control cabinet. The mounting frame includes the necessary seals and frame to ensure
compliance with degree of protection IP55.
If you do not use the optional mounting frame, then you must ensure that the required degree
of protection is complied with using other appropriate measures. Mounting instructions are
provided in the following section:
The following dimension drawings and drilling patterns are not to scale.
Frame sizes FSA ... FSC
Wall thickness of the control cabinet ≤3.5 mm
Figure 4-5
Power Module PM240-2
Hardware Installation Manual, 08/2017, A5E33294624B AG
Mounting frames for PT power modules (Page 121)
Dimension drawing and drilling dimensions for frame sizes FSA ... FSC
Installing/mounting
4.4 Mounting the Power Modules
37