Contec IPC Series User Manual page 9

1. Before Using the Product
- Do not modify the product. CONTEC will bear no responsibility for any problems, etc., resulting
from modifying this product.
- Regardless of the foregoing statements, CONTEC is not liable for any damages whatsoever
(including damages for loss of business profits) arising out of the use or inability to use this
CONTEC product or the information contained herein.
- Do not turn off the power during disk access (when rewriting).
Otherwise, CF in the product and the data contained in the CF may be damaged.
- The silicon disk may malfunction if this product instantaneously stops during a write operation.
For this reason, the product has a protection circuit that minimizes disk failures during an
instantaneous stop. Use UPS as a complete countermeasure for instantaneous stop problems.
- This product does not operate properly, when combined with our SBC [PC-686C(PC)H series].
- CF has a limitation for the number of times to rewrite, due to the memory used. This write
tolerance depends on the actual use conditions.
- Use only the supplied option CF (CF-xGB-R) for the expansion CF. CONTEC will bear no
responsibility for any problems, etc., resulting from using the commercially available CF.
- The operation of this product has been checked in combination with our other products. Use the
product within the scope of your responsibilities when using it in combination with products from
other companies.
4
PC-RSD Series