Cellaview Software; Installation Of The Usb Driver - Siemens 7MC3040-... Operating Manual

s
Simulated current signal for outputs Ao1 and Ao2 (configuration
C100
layer: )
Parameter Function
Current output 1
AO1.
Current output 1
AO1.T
incl. scaled tem-
perature
AO2.
Current output 2*
Current output 2
AO2.T
incl. scaled tem-
perature*
ESC
Escape
* Function only available when Current Output 2 is activated.
9

CellaView software

The CellaView software displays, evaluates and stores the temperature
readings of your pyrometer.
Download the CellaView software here:
http://www.industry.siemens.com/services/global/de/sirent/verkauf/Documents/software/cellaview.zip
10

Installation of the USB driver

The ARDOCELL PA pyrometer can be addressed via a special driver.
On systems with Windows 7, 8 or 10 the driver installs a virtual COM in-
terface which allows access to the serial port of the pyrometer.
Use the link below to download the driver
www.prolific.com.tw
Alternatively, the USB driver can be installed from the CellaView installa-
tion packets.
Install the driver and connect the pyrometer to the PC (USB cable is in-
cluded in the scope of delivery). Windows will recognise the new hard-
ware. Windows automatically assigns a virtual COM port. To determine
the COM port number assigned to the adapter, check the Device Man-
ager as follows:
Explanation
Enter a value in milliampere to simulate a current
signal for Ao1
Enter a temperature value to simulate a temper-
ature reading for Ao1 (based on linear scale).
Enter a value in milliampere to simulate a current
signal for Ao2
Enter a temperature value to simulate a temper-
ature reading for Ao2 (based on linear scale).
Exit menu
(PL2303 Prolific Driverinstaller.zip v1.x.x)
38
Operating manual PA