Siemens 7MC3040-... Operating Manual page 44

s
DO2.F
Do2 function
Do 2 switching
DO2.T
threshold
DO2.H
Do2 signal threshold
Do2 lower limit of
DO2._
range
Do2 upper limit of
DO2.~
range
DO2.L
Do2 delay time
DO2.M
Do2 Hold time
Analogue input func-
AI.FN
tion
Analogue in upper
AI.U1
and lower voltage
values
Analogue in upper
AI.U2
and lower voltage
values
Analogue in upper
AI.V1
and lower input vari-
ables
Analogue in upper
AI.V2
and lower input vari-
ables
SAVE
Save
ESC
Escape
** Only available with ATD function

NOTE !
Ao1 and Ao2 stand for Analogue Output 1 and Analogue Output 2
Do1 and Do2 stand for Switching Output 1 and Switching Output 2
Ain stands for Analogue Input
Operating manual PA
L1 Lambda 1
L1.PR Lambda 1 without peak picker
TU Device inner temperature
M.TR.1 Triggered by ATD function Lambda 1**
A.AC.1 Measuring time ATD Lamda 1**
Swich direction "Level" (output activ if limit
LVL.
excess)
Switch direction "Level" / output inverted
LVL.-
Switch direction "Range" (output activ if
RN6.
limit excess)
Switch direction "Range" / output inverted
RN6-
Temperature limit
(only available at function "Level")
Hysteresis +/- relative to signal threshold
(only available at function "Level")
Lower limit of range for switch signal
(only available function "Range")
Upper limit of range for switch signal
(only available function "Range")
See Chap. 7
See Chap. 7
OFF Analogue input deactivated
EPS. Emmisivity for Lambda 1 via analogue input
BACK. Temp. ambient radiation via analogue in-
put
Define lower limit of voltage span for input voltage
1 (0 - 10V)
Define lower limit of voltage span for input voltage
2 (0 - 10V)
Input variable 1 (example 0% for emissivity)
Input variable 2 (example 100% for emissivity)
Save changes / exit menu
Discard changes / exit menu
36