Displayed Temperature Readings; Software Cellaview; Pc Interface - Siemens Ardoptix PT 140 AF4 Operating Manual

s

16.1.6 Displayed temperature readings

(Configuration layer: C002)
Parameter Function
Temp. reading
Q.
Quotient
Temp. reading
L1.
Lambda1
Temp. reading
L2.
Lambda1
Temp. reading Quoti-
Q. PR.
ent Pre
Temp. reading Lamb-
L1.PR.
da1 Pre
Temp. reading Lamb-
L2.PR.
da 2 Pre
1NTY.
Signal-Intensity
T.INT.
Inner temperature
END
Ende
17

Software CellaView

The software CellaView can be used for
chiving of measured values of your pyrometer.
You can download the CellaView software here:
http://www.industry.siemens.com/services/global/de/sirent/verkauf/Documents/software/cellaview.zip
18

PC Interface

The Ardoptix features a USB port to enable data communication to a PC
for remote device configuration and temperature monitoring. Either use
the CellaView software or use another standard terminal program.
The USB port is on the back of the pyrometer, covered by a protective
cap. The pyrometer is supplied with a standard USB cable.
A Windowsoperating system released prior to Windows7 will not au-
tomatically identify the Ardoptix as the peripheral device. The required
driver is included in the CellaView.zip or use the link
to download the PL 2303 driver.
When using the CellaView software no additional parameter must be set.
For more information on CellaView, please refer to the software instruc-
tion manual.
Explanation
Shows current temperature reading in two-
colour mode
Actual temperature reading lL 1
Actual temperature reading L 2
Shows current temperature reading in two-
colour/ratio mode prior to peak picker
Shows current temperature reading for L1
prior to peak picker
Shows current temperature reading for L2
prior to peak picker
Calculated signal intensity
Current inner temp. of device
Menü verlassen
representation, analysis and ar-
29
Operating manual
www.prolific.com.tw