How To Operate The Pyrometer With The Cellaview Software - Siemens 7MC3040-... Operating Manual

s
First, open the Run dialog box by using the Windows key + R key combi-
nation. Then enter the command "devgmt.msc."
and click OK to open the Device Manager. Then click
Ports (COM and LPT). You will see a listing of ports and should now be
able to see which COM Port the PA USB connection assigned to. The
ARDOCELL PA USB connection will be indicated as a USB-to-Serial
Comm Port. In this example, COM Port 5 has been assigned to the
adapter. You will need to select this particular COM Port in the software
settings.
11 How to operate the pyrometer with the CellaView
software
It is not necessary to change settings when using the CellaView soft-
ware. The CellaView software both works via USB and RS485 interface.
The interface can be operated either as a point-to-point connection to
connect a device or as a bus to connect up to 31 pyrometers.
Operating manual PA
39