Remove the cable management arm.
5.
Extend the chassis from the rack
Pull down the quick release levers on each side of the chassis.
1.
WARNING:
adequately stabilized before extending a component from the rack.
Extend the chassis from the rack until it locks once.
2.
Press the push tab on the rail, and then fully extend the chassis.
3.
WARNING:
latches and sliding the server into the rack. The sliding rails could pinch your fingers.
To reduce the risk of personal injury or equipment damage, be sure that the rack is
To reduce the risk of personal injury, be careful when pressing the server rail-release
Removal and replacement procedures 23