Lift the fan louver out of the chassis.
8.
To replace the component, reverse the removal procedure.
Fan cable
To remove the component:
Power down the chassis (on page 21).
1.
Open the cable management arm (on page 22).
2.
Remove all power:
3.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the chassis.
b.
Disconnect all peripheral devices from the chassis.
4.
Extend the chassis from the rack (on page 23).
5.
Remove the access panel (on page 24).
6.
Remove the midplane cover
7.
Disconnect the fan cable from each end of the midplane.
8.
("Midplane
cover" on page 39).
Removal and replacement procedures 41