Remove The Access Panel - HP Moonshot 1500 Maintenance And Service Manual

After performing the installation or maintenance procedure, slide the chassis back into the rack, and
4.
then press the chassis firmly into the rack to secure it in place.

Remove the access panel

IMPORTANT:
the chassis when complete. Do not operate the chassis for long periods of time with the access
panel removed.
IMPORTANT:
access panel is removed.
IMPORTANT:
power operating state to reduce thermal stress.
To remove the component:
If the locking latch is locked, use a T-15 Torx screwdriver to unlock the latch.
1.
Open the locking latch.
2.
The access panel slides back, releasing it from the chassis.
After performing a procedure inside the chassis, always install the access panel on
To maintain appropriate cooling, fans will operate at a high speed when the
When the access panel is removed, the cartridge might be placed into a low
Removal and replacement procedures 24