Midplane Cover - HP Moonshot 1500 Maintenance And Service Manual

Remove the component as indicated.
3.
To replace the component, reverse the removal procedure.

Midplane cover

To remove the component:
Power down the chassis (on page 21).
1.
Open the cable management arm (on page 22).
2.
Remove all power:
3.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the chassis.
b.
Disconnect all peripheral devices from the chassis.
4.
Extend the chassis from the rack (on page 23).
5.
Remove the access panel (on page 24).
6.
Removal and replacement procedures 39