Table of Contents
Advertisement
81.65 kg
180.00 lb
Warnings and cautions
Before installing a chassis, be sure that you understand the following warnings and cautions.
WARNING:
•
Do not disable the power cord grounding plug. The grounding plug is an important safety
feature.
Connect the power cord into a grounded (earthed) electrical outlet that is easily accessible at
•
all times.
Disconnect the power cord from the power supply to disconnect power to the equipment.
•
Do not route the power cord where it can be walked on or pinched by items placed against it.
•
Pay particular attention to the plug, electrical outlet, and the point where the cord extends from
the chassis.
CAUTION:
Operating the chassis in this manner results in improper airflow and improper cooling that can
lead to thermal damage.
Fans
CAUTION:
When removing or replacing a fan, observe the following guidelines:
This symbol indicates the presence of electric shock hazards. The area contains no user
or field serviceable parts. Do not open for any reason.
WARNING:
To reduce the risk of injury from electric shock hazards, do not open this
enclosure.
This symbol on an RJ-45 receptacle indicates a network interface connection.
WARNING:
To reduce the risk of electric shock, fire, or damage to the equipment, do
not plug telephone or telecommunications connectors into this receptacle.
This symbol indicates the presence of a hot surface or hot component. If this surface is
contacted, the potential for injury exists.
WARNING:
To reduce the risk of injury from a hot component, allow the surface to cool
before touching.
This symbol indicates that the component exceeds the recommended weight for one
individual to handle safely.
WARNING:
To reduce the risk of personal injury or damage to the equipment, observe
local occupational health and safety requirements and guidelines for manual material
handling.
These symbols, on power supplies or systems, indicate that the equipment is supplied
by multiple sources of power.
WARNING:
To reduce the risk of injury from electric shock, remove all power cords to
completely disconnect power from the system.
To reduce the risk of electric shock or damage to the equipment:
Do not operate the chassis for long periods with the access panel open or removed.
To optimize cooling and performance, replace hot-plug fans promptly.
Removal and replacement procedures 31
Hide quick links:
Advertisement
Table of Contents
