GE N60 Instruction Manual page 24

1.3 ENERVISTA UR SETUP SOFTWARE
3. Click the Quick Connect button to open the Quick Connect dialog box.
1
4. Select the Ethernet interface and enter the IP address assigned to the N60, then click the Connect button. The
EnerVista UR Setup software creates a site named "Quick Connect" with a corresponding device also named "Quick
Connect" and displays them at the upper-left of the screen.
5. Expand the sections to view data directly from the N60 device.
Each time the EnerVista UR Setup software is initialized, click the Quick Connect button to establish direct communica-
tions to the N60. This ensures that configuration of the EnerVista UR Setup software matches the N60 model number.
When direct communications with the N60 via Ethernet is complete, make the following changes:
1. From the Windows desktop, right-click the My Network Places icon and select Properties to open the network con-
nections window.
2. Right-click the Local Area Connection icon and select the Properties item.
3. Select the Internet Protocol (TCP/IP) item from the list provided and click the Properties button.
4. Set the computer to "Obtain a relay address automatically" as shown.
If this computer is used to connect to the Internet, re-enable any proxy server settings after the computer has been discon-
nected from the N60 relay.
AUTOMATIC DISCOVERY OF ETHERNET DEVICES
The EnerVista UR Setup software can automatically discover and communicate to all UR-series IEDs located on an Ether-
net network.
Using the Quick Connect feature, a single click of the mouse triggers the software to automatically detect any UR-series
relays located on the network. The EnerVista UR Setup software then proceeds to configure all settings and order code
options in the Device Setup menu. This feature allows the user to identify and interrogate all UR-series devices at a loca-
tion.
1-14 N60 Network Stability and Synchrophasor Measurement System
1 GETTING STARTED
GE Multilin