Modbus User Map - GE N60 Instruction Manual
Ur series network stability and synchrophasor measurement system
Hide thumbs
Also See for N60:
- Instruction manual (666 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (544 pages)
Table of Contents
Advertisement
5 SETTINGS
PATH: SETTINGS
PRODUCT SETUP
ADDRESSES
IEC NETWORK
CLIENT ADDRESSES
MESSAGE
MESSAGE
MESSAGE
MESSAGE
The UR can specify a maximum of five clients for its IEC 104 connections. These are IP addresses for the controllers to
which the UR can connect.
A maximum of two simultaneous connections are supported at any given time.
PATH: SETTINGS
PRODUCT SETUP
MODBUS USER MAP
MESSAGE
MESSAGE
MESSAGE
The Modbus user map provides read-only access for up to 256 registers. To obtain a memory map value, enter the desired
address in the
line (converted from hex to decimal format). The corresponding value displays in the
ADDRESS
value of "0" in subsequent register
by "1". An address value of "0" in the initial register means "none" and values of "0" display for all registers. Different
values can be entered as required in any of the register positions.
ADDRESS
GE Multilin
N60 Network Stability and Synchrophasor Measurement System
COMMUNICATIONS
CLIENT ADDRESS 1:
0.0.0.0
CLIENT ADDRESS 2:
0.0.0.0
CLIENT ADDRESS 3:
0.0.0.0
CLIENT ADDRESS 4:
0.0.0.0
CLIENT ADDRESS 5:
0.0.0.0
MODBUS USER MAP
ADDRESS
1:
VALUE:
0
ADDRESS
2:
VALUE:
0
ADDRESS
3:
VALUE:
0
↓
ADDRESS 256:
VALUE:
0
lines automatically returns values for the previous
ADDRESS
IEC 60870-5-104 PROTOCOL
Range: Standard IPV4 address format
Range: Standard IPV4 address format
Range: Standard IPV4 address format
Range: Standard IPV4 address format
Range: Standard IPV4 address format
Range: 0 to 65535 in steps of 1
0
Range: 0 to 65535 in steps of 1
0
Range: 0 to 65535 in steps of 1
0
Range: 0 to 65535 in steps of 1
0
5.2 PRODUCT SETUP
IEC NETWORK CLIENT
5.2.5 MODBUS USER MAP
line. A
VALUE
lines incremented
ADDRESS
5-57
5
Advertisement
Table of Contents
