Cisco Flex 7500 Deployment Manual page 95

Figure 49
show flexconnect group detail
The command show ap config general <AP name> can be used to view the WLAN-VLAN mappings
per AP.
Figure 50 show ap config general Output
The following commands can be used to troubleshoot this feature:
On WLC:
•
debug flexconnect wlan-vlan <enable | disable>
On AP:
•
debug capwap flexconnect wlan-vlan
WLAN-VLAN mapping at FlexConnect Group Level
Output
Flex 7500 Wireless Branch Controller Deployment Guide
95