Advertisement
Support for PEAP and EAP-TLS Authentication
Figure 15
3.
Enable AP Local Authentication.
Enable the Enable AP Local Authentication check box on the FlexConnect groups edit page.
Radius Servers on the FlexConnect group must be 'Unconfigured'. If any RADIUS servers are
configured on the FlexConnect group, the AP tries to authenticate the wireless clients using the
RADIUS servers first. AP Local Authentication is attempted only if no RADIUS servers are found,
either because the RADIUS servers timed out or no RADIUS servers were configured.
Figure 16
Selecting EAP methods will now have two more options, PEAP and EAP-TLS under the
4.
FlexConnect group with the existing LEAP and EAP-FAST options.
a.
Flex 7500 Wireless Branch Controller Deployment Guide
74
WLANs for Local Switching and Local Authentication
FlexConnect Group Configuration for AP Local Authentication
Current controller release supports downloading of EAP device and root (CA) certificates to the
controller and the same is stored in PEM format on the flash.
Advertisement
