AP Pre-Image Download
Summary
•
•
•
Procedure
Complete these steps:
Upgrade the image on the primary and backup controllers.
Step 1
Navigate under WLC GUI > Commands > Download File to start the download.
Save the configurations on the controllers, but do not reboot the controller.
Step 2
Issue the AP pre-image download command from the primary controller.
Step 3
a.
b.
c.
Flex 7500 Wireless Branch Controller Deployment Guide
56
Ease of software management
Schedule per store upgrades: NCS or Cisco Prime is needed to accomplish this.
Reduces downtime
Navigate to WLC GUI > Wireless > Access Points > All APs and choose the access point to start
pre-image download.
Once the access point is chosen, click the Advanced tab.
Click Download Primary to initiate pre-image download.