Advertisement
In this configuration, VLAN 109 is used for WLAN VLAN mapping and VLAN 3 is used for
Note
AAA override.
Step 7
Configure WLAN to VLAN Mapping for the FlexConnect AP. Based on this configuration, the AP
would have the interfaces for the VLAN. When the AP receives the VLAN configuration, corresponding
dot11 and Ethernet sub-interfaces are created and added to a bridge-group. Associate a client on this
WLAN and when the client associates, its VLAN (default, based on the WLAN-VLAN mapping) is
assigned.
Navigate to WLAN GUI > Wireless > All APs, click the specific AP > FlexConnect tab, and click
VLAN Mapping.
Step 8
Create a user in the AAA server and configure the user to return VLAN ID in IETF Radius attribute.
In order to have dynamic VLAN assignment, the AP would have the interfaces for the dynamic VLAN
Step 9
pre-created based on the configuration using existing WLAN-VLAN Mapping for the individual
FlexConnect AP or using ACL-VLAN mapping on FlexConnect group.
In order to configure AAA VLAN on the FlexConnect AP, navigate to WLC GUI > Wireless >
FlexConnect Group, click the specific FlexConnect group > VLAN-ACL mapping, and enter VLAN
in the Vlan ID field.
Flex 7500 Wireless Branch Controller Deployment Guide
FlexConnect VLAN Override
35
Advertisement
