Advertisement
Complete the steps:
Join wireless clients to the multicast streaming video.
Step 1
Use VLC player to stream and watch video.
Note
Double click on the VLC icon on your desktop. Click Media > Open Network stream. Choose
Step 2
Protocol = UDP, Address = 229.77.77.28, Port = 1234 in the format udp://@229.77.77.28:1234
Click Play.
Step 3
L3_Switch#show ip mroute
IP Multicast Routing Table
Flags: D - Dense, S - Sparse, B - Bidir Group, s - SSM Group, C - Connected,
L - Local, P - Pruned, R - RP-bit set, F - Register flag,
T - SPT-bit set, J - Join SPT, M - MSDP created entry, E - Extranet,
X - Proxy Join Timer Running, A - Candidate for MSDP Advertisement,
U - URD, I - Received Source Specific Host Report,
Z - Multicast Tunnel, z - MDT-data group sender,
Y - Joined MDT-data group, y - Sending to MDT-data group,
V - RD & Vector, v - Vector
Outgoing interface flags: H - Hardware switched, A - Assert winner
Timers: Uptime/Expires
Interface state: Interface, Next-Hop or VCD, State/Mode
(*, 239.255.255.250), 4d20h/00:02:47, RP 0.0.0.0, flags: DC
Incoming interface: Null, RPF nbr 0.0.0.0
Outgoing interface list:
Vlan56, Forward/Sparse-Dense, 4d19h/stopped
(*, 229.77.77.28), 4d15h/00:02:44, RP 0.0.0.0, flags: DC
Incoming interface: Null, RPF nbr 0.0.0.0
Outgoing interface list:
Vlan56, Forward/Sparse-Dense, 00:17:24/stopped
(*, 224.0.1.40), 5d17h/00:02:53, RP 0.0.0.0, flags: DCL
Incoming interface: Null, RPF nbr 0.0.0.0
Outgoing interface list:
Vlan56, Forward/Sparse-Dense, 5d17h/stopped
Flex 7500 Wireless Branch Controller Deployment Guide
Client ACL Support
113
Advertisement
