Download Print this page

Cisco Flex 7500 Deployment Manual page 39

Wireless branch controller

Hide thumbs Also See for Flex 7500:

Step 4

Make sure that the FlexConnect AP has some sub-interface present in its database, either via

WLAN-VLAN Mapping on a particular Flex AP or via configuring VLAN from a Flex group. In this

example, VLAN 63 is configured in WLAN-VLAN mapping on Flex AP.

In this example, VLAN 62 is configured on WLC as one of the dynamic interfaces and is not mapped to

Step 5

the WLAN on the WLC. The WLAN on the WLC is mapped to Management VLAN (that is, VLAN 61).

FlexConnect VLAN Based Central Switching

Flex 7500 Wireless Branch Controller Deployment Guide