Cisco Flex 7500 Deployment Manual page 73

4.
Detailed steps on how to accomplish the above steps are listed in Document-100590
(http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a008093f1b9.sh
tml)
Figure 13
Configuration of EAP-TLS on FlexConnect AP
1.
Figure 14
2.
Install client and CA certificate on the client.
Document 100590
Create WLAN for Local Switching and Local Authentication.
In the example below, two WLANs have been created, one for EAP-TLS and the other for PEAP
authentication.
WLAN Configuration for PEAP and EAP-TLS
Enable FlexConnect Local Switching and FlexConnect Local Auth
Support for PEAP and EAP-TLS Authentication
Flex 7500 Wireless Branch Controller Deployment Guide
73