Cisco Flex 7500 Deployment Manual page 86

Support for PEAP and EAP-TLS Authentication
Figure 33
Show Commands
The EAP type of the client will be reflected on the WLC and can be seen in the output of show client
detail
Figure 34
CLI Support for PEAP and EAP-TLS on FlexConnect APs
Two new CLIs have been added to configure PEAP and EAP-TLS from the controller.
config flexconnect group <groupName> radius ap
config flexconnect group <groupName> radius ap
Flex 7500 Wireless Branch Controller Deployment Guide
86
Web GUI Client Details
EAP Type of Client Authenticated using PEAP
peap <enable | disable>
eap-tls <enable | disable>