Advertisement
Client Limit per WLAN
Along with traffic segmentation, the need for restricting the total client accessing the wireless services
arises. For example, limiting total Guest Clients from branch tunneling back to the Data Center.
In order to address this challenge, Cisco is introducing Client Limit per WLAN feature that can restrict
the total clients allowed on a per WLAN basis.
Primary Objective
•
•
Note
By default, the feature is disabled and does not force the limit.
Limitations
This feature does not enforce client limit when the FlexConnect is in Standalone state of operation.
WLC Configuration
Complete these steps:
Step 1
Select the Centrally Switched WLAN ID 1 with SSID DataCenter. This WLAN was created during THE
AP Group creation. See
Click the Advanced tab for WLAN ID 1.
Step 2
Step 3
Set the client limit value for the Maximum Allowed Clients text field.
Step 4
Click Apply after the text field for Maximum Allowed Clients is set.
Set limits on maximum clients
Operational ease
This is not a form of QoS.
Figure
7.
Flex 7500 Wireless Branch Controller Deployment Guide
Client Limit per WLAN
51
Advertisement
